- Diagnostic via CAN and special functions via K-line.
- Covers all electronic control units in vehicles (diagnostic addresses from 0×01 to 0×80).
- This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0
- Manual definition of running diagnostic session not like remaining diagnostic tools always standard diagnostic session 0×89. Function is under CAN-TP2.0
- Broadcast diagnostic request, disable normal communication, clear DTCs, Logistic (transport) mode,…. Functions are under CAN-TP2.0
- Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0
- Most of popular diagnostic requests, identifications, coding, adaptations, DTCs and S.O. Functions are under CAN-TP2.0
- Odometer correction in instrument clusters and EDC15x
- Read Security Access Code/Login WFS
- Read/program immobilizer data
- Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K
- Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic
- ME7.8,Porsche
- Key learning buttons for easy usage (not needed security code). Can do component security authorization
- Key learning Porsche CAYENNE (not needed security code) K+CAN
- Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories)
- Crash data clear in airbag units
- Comes with software CD
- Cable length: 145cm
- Compatible Vehicles:VW Passat/VW/VW Bora/VW Polo/VW Golf/Audi A6/Audi A8/Audi A4/Skoda Superb/Skoda Octavia and so on
Download CD Driver for VAG-K+CAN USB Vehicle OBD Cable
Popularity: 10% [?]
